News/Press Releases

1.	February 24, 2006 - New Sugino Varimec Drill Unit Proves Ideal for Drilling, Counterboring and Burnishing; Excellent End-Milling and Facing Operations Itasca, Illinois. Sugino recently unveiled their new intermediate-size, mechanical-feed, 1.5 HP (1.2 kW) electrically-driven Varimec Selfeeder drill unit to meet the demand of manufacturers for accurate holemaking requirements in a wide-range of metals and other materials, announced Sugino National Sales Manager John Fischer. Fischer stated the Varimec SSV-4 drill units are being installed in a wide range of precision applications including the automotive and aerospace industries, in...

2.	October 5, 2004 - Sugino U-Jet III(TM) Delivers High-Pressure Water with Controlled Cavitation for Superior Cleaning of Critical, Complex-Machined Components Itasca, Illinois. Washing and cleaning machined parts of cutting fluids and loose chips has always presented problems to manufacturers. Low-pressure wash systems can barely clean cutting fluids or clear parts of loose debris and chips. Medium pressure systems to 500 PSI can cut fluids and flush most other contaminants but are no guarantee against compacted chips that can break loose and cause erratic operation and possibly lead to warranty failure of the component.

3.	September 16, 2004 - New Sugino Jet-Clean® Center Improves High-Pressure Water Deburring Process Itasca, Illinois. Sugino Corp. has introduced an improved version of its flexible Jet-CLean Center 4-axis, high-pressure water deburring center that has attained high success ratings from its many users for clearing chips and burrs from critical, precision-machined components in such applications as automotive fuel and braking systems, hydraulic pumps, cylinder heads, crank and cam shafts, and other critical performance parts, announced Sugino National Sales Manager John Fischer.

4.	July 29, 2004 — New Sugino "Varimec" Lead-Screw Selfeeder Drill Units Reduces Size Configuration, Holds Precise Holemaking Tolerances; Provides Accurate End Milling, Facing Machining Operations Itasca, Illinois. The newly engineered "Varimec(TM)" powerful lead-screw Selfeeder was designed to meet the demand by manufacturers for a smaller, more powerful and accurate self-contained drill unit capable of a high degree of accuracy in a wide-range of metals and other materials.

5.	July 12, 2004 - Sugino Superoll® Burnishing Tools Process ID and OD Metal Surfaces to a Hardened, Mirror-Like Finish in One Pass; Reduces Machining Time and Equipment Cost up to 90% Itasca, Illinois. By making use of special rollers that cold work a metal surface, the Sugino line of Superoll® burnishing tools can burnish the inside or outside diameters of any bored, reamed or turned workpiece to produce an extremely fine, wear-resistant finish (down to 2 micro-inch or less) in a single pass: resulting in a mirror-like, smoother, harder surface with better resistance to corrosion than a ground or honed workpiece.

6.	September 10, 2002 - Next Generation Sugino Jet-Flex II Improves High-Pressure Water Deburring Process Schaumburg, Illinois. Sugino Corp. has introduced an improved version of its flexible Jet-Flex 4-axis, high-pressure deburring center that has attained high success ratings from its many users for clearing chips and burrs from critical, precision-machined components for automotive fuel and braking systems, hydraulic pumps, cylinder heads, crank and cam shafts, and other critical performance parts, announced Sugino National Sales Manager John Fischer.

7.	August 30, 2002 - Sugino U-Jet(TM) Delivers High-Pressure Water with Controlled 4-Axis Cavitation for Superior Wash and Cleaning of Large, Complex-Machined Parts Schaumburg, Illinois. Washing and cleaning machined parts of cutting fluids and loose chips has always presented problems to manufacturers. Low-pressure wash systems can barely clean cutting fluids and clear parts of loose debris and chips. Medium pressure systems to 500 PSI can cut fluids and flush most other contaminants but are no guarantee against compacted chips and turnings that can break loose and cause erratic operation and possibly lead to warranty failure of the component.

Click here to go directly to the Sugino News and Press releases on ThomasNet.com.